Cowboy Series Special

$ 47.00 $ 52.75
  • Cowboy Series Special

Cowboy Series Special

$ 47.00 $ 52.75

The Cowboy Series Special includes the Cowboy Series mold, a tube-in rolling jig, and 4 label sizing templates for popular pen kits cast in the Cowboy Series mold:  PSI Dragon Twist and Skull Twist.  Two set of stoppers are provided - the original longer small stoppers that come with the Cowboy mold (holds 7-8 mm tubes) and the shorter small stoppers that can be used with the larger 3/8" tubes.

Template sizes included:

  • PSI Ballpoint DRAGON TWIST UPPER- 1.64" x 1.20"
  • PSI Ballpoint DRAGON TWIST LOWER - 1.49" x 1.20"
  • PSI SKULL TWIST UPPER - 1.40" x 1.20" 
  • PSI SKULL TWIST LOWER - 1.75" x 1.20"

    Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

        Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements.

        PLEASE NOTE:

        Blue molds except Gisi Style Molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite Clear), and Epoxy Resin (Liquid Diamonds).

        Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Themoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

        Please contact us or visit our Casting Basics Guide for more information on mold casting.

        • Gallery
        • Description

        The Cowboy Series Special includes the Cowboy Series mold, a tube-in rolling jig, and 4 label sizing templates for popular pen kits cast in the Cowboy Series mold:  PSI Dragon Twist and Skull Twist.  Two set of stoppers are provided - the original longer small stoppers that come with the Cowboy mold (holds 7-8 mm tubes) and the shorter small stoppers that can be used with the larger 3/8" tubes.

        Template sizes included:

        • PSI Ballpoint DRAGON TWIST UPPER- 1.64" x 1.20"
        • PSI Ballpoint DRAGON TWIST LOWER - 1.49" x 1.20"
        • PSI SKULL TWIST UPPER - 1.40" x 1.20" 
        • PSI SKULL TWIST LOWER - 1.75" x 1.20"

          Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

              Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements.

              PLEASE NOTE:

              Blue molds except Gisi Style Molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite Clear), and Epoxy Resin (Liquid Diamonds).

              Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Themoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

              Please contact us or visit our Casting Basics Guide for more information on mold casting.