Cambridge Series

• Cambridge Rollerball or Fountain Pen Kit
• Churchill Screw Cap
• Apollo Elite Screw Cap
• EL Grande Twist Cap
• EL Grande Screw Cap 
• Old Ligero Screw Cap
• Olympian Elite Screw Cap
• Cambridge / Ultra Screw Cap
• Cambridge / Hybrid Screw Cap

Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements.

PLEASE NOTE:

Due to the nature of products used to create various casting molds and resin options, we cannot guarantee initial castings will produce a totally bubble / blemish free, glass-like finish. Depending on the casting project involved, there are usually secondary finishing efforts required, such as turning on a lathe, sanding, buffing, polishing, and/or applying a final leveling resin coat to achieve a perfectly clear, smooth exterior for your hand cast resin projects.

Blue molds except Gisi Style Molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite Clear), and Epoxy Resin.

Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Thermoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

Please contact us or visit our Casting Basics Guide for more information on mold casting.

Follow PTownSubbie on Facebook!