Cigar Series - Blue

$ 25.00
  • Cigar Series - Blue

Cigar Series - Blue

$ 25.00
This blue tube-in silicone mold casts one upper and one lower tube for the following kits:
  • Cigar Twist BP Pen Kit
  • Fat Cigar Twist BP Pen Kit
  • Apprentice Cigar Twist BP Pen Kit
  • Extra Large Cigar Twist BP Pen Kit
  • Big Ben Cigar Twist BP Pen Kit
  • Cigar 0.5 mm Pencil Pen Kit
  • Hybrid Cigar Twist BP Pen Kit
  • Ultra Cigar Twist BP Pen Kit
Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

    Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements.

    PLEASE NOTE:

    Blue molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite), and Epoxy Resin (such as West Epoxy System or Liquid Diamonds).

    Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Themoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

    Please contact us or visit our Casting Basics Guide for more information on mold casting.

    • Gallery
    • Description
    This blue tube-in silicone mold casts one upper and one lower tube for the following kits:
    • Cigar Twist BP Pen Kit
    • Fat Cigar Twist BP Pen Kit
    • Apprentice Cigar Twist BP Pen Kit
    • Extra Large Cigar Twist BP Pen Kit
    • Big Ben Cigar Twist BP Pen Kit
    • Cigar 0.5 mm Pencil Pen Kit
    • Hybrid Cigar Twist BP Pen Kit
    • Ultra Cigar Twist BP Pen Kit
    Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

      Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements.

      PLEASE NOTE:

      Blue molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite), and Epoxy Resin (such as West Epoxy System or Liquid Diamonds).

      Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Themoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

      Please contact us or visit our Casting Basics Guide for more information on mold casting.