Skip to content
Welcome to PTownSubbie.com - Custom Source for the Hobby Caster!
Welcome to PTownSubbie.com - Custom Source for the Hobby Caster!

Patriot Series - Silicone Mold

$ 30.00

BUNDLE AND SAVE: Patriot Series Special includes the series mold, initial stoppers, and 8 label sizing templates associated with the mold. $54.60 (you save $6.65)

BULK CASTERS may appreciate the larger 4.0 Patriot Mold.

This blue tube-in silicone mold casts two tubes for the following kits:

  • Artisan Patriot Twist BP Pen Kit
  • Carbara Twist BP Pen Kit
  • Polaris Twist BP Pen Kit
  • Polaris 7mm Pencil Pen Kit
  • Atlas Twist BP Pen Kit
  • PSI Civil War Pen Kit
  • PSI Executive Twist BP Pen Kit
  • PSI Knight's Armor Pen Kit
  • PSI Fly Fishing Pen Kit
  • Woodcraft Nuclear Submarine Pen Kit
  • Vertex Click Pen Kit
  • Professor Pen Kit
  • Nautical Pen Kit
  • PSI Knurl GT Pen Kit
  • CSUSA Exemplar Pen Kit
  • PSI Deluxe Sketch Pen/Pencil Combo Kit (PKSPCL2xx)
  • PSI Phoenix Rising Pen Kit
  • PSI American Beauty Pen Kit

Most tube-in series are universal in nature, if the tube length is close and bushings are the same size or smaller, then the tube-in blank should cast properly.  Please visit IAP Kit Bushing and Tube Reference for various pen kit dimensions.

    Initial set of stoppers are included with a mold purchase. CLICK HERE to buy replacements. 

    PLEASE NOTE:

    Due to the nature of products used to create various casting molds and resin options, we cannot guarantee initial castings will produce a totally bubble / blemish free, glass-like finish. Depending on the casting project involved, there are usually secondary finishing efforts required, such as turning on a lathe, sanding, buffing, polishing, and/or applying a final leveling resin coat to achieve a perfectly clear, smooth exterior for your hand cast resin projects.

    Blue molds except Gisi Style Molds cast Polyester Resin (Silmar 41), Urethane Resin (Alumilite Clear), and Epoxy Resin.

    Mold release sprays help to extend the shelf life of our molds. We recommend Stoner Thermoset for Polyester and Epoxy Resins, and Stoner Urethane for Urethane Resin.

    Please contact us or visit our Casting Basics Guide for more information on mold casting.