Cartridge Pen Kits w/MCRD San Diego Pen Blank

$ 29.95
  • Cartridge Pen Kits w/MCRD San Diego Pen Blank

Cartridge Pen Kits w/MCRD San Diego Pen Blank

$ 29.95

Designed by Jason Rose, the upper pen blank features images and sand commemorating the Marine Corps Recruit Depot (MCRD) in San Diego, California.

Our special MCRD San Diego pen kit offer includes

  • Real 30 caliber casing and copper billet lower half assembly
  • Gold titanium pen clip with finial top
  • Unturned MCRD San Diego upper pen blank
  • MCRD Sand Diego Sand Certificate of Authenticity

CERTIFICATE OF AUTHENTICITY:

Congratulations, you are the owner of a MCRD San Diego Pen (Blank). In this blank are grains of sand collected from MCRD San Diego, CA.

UPPER PEN BLANK INSTRUCTIONS:

The lower interface of the upper blank uses a 30 CAL Bolt Action Bushing.  The upper finial uses a Euro or Designer finial bushing. The blank is turned to size and polished like a normal resin blank. Sand through the 12,000 grit Micro Mesh pads.  You can use a plastic polish after if desired, but it is not required. 

LOWER HALF ASSEMBLY INSTRUCTIONS:

For the brass cartridge itself, you may want to polish with Renaissance Wax to prevent tarnish, or expect to polish often as untreated brass. 

  • Gallery
  • Description

Designed by Jason Rose, the upper pen blank features images and sand commemorating the Marine Corps Recruit Depot (MCRD) in San Diego, California.

Our special MCRD San Diego pen kit offer includes

  • Real 30 caliber casing and copper billet lower half assembly
  • Gold titanium pen clip with finial top
  • Unturned MCRD San Diego upper pen blank
  • MCRD Sand Diego Sand Certificate of Authenticity

CERTIFICATE OF AUTHENTICITY:

Congratulations, you are the owner of a MCRD San Diego Pen (Blank). In this blank are grains of sand collected from MCRD San Diego, CA.

UPPER PEN BLANK INSTRUCTIONS:

The lower interface of the upper blank uses a 30 CAL Bolt Action Bushing.  The upper finial uses a Euro or Designer finial bushing. The blank is turned to size and polished like a normal resin blank. Sand through the 12,000 grit Micro Mesh pads.  You can use a plastic polish after if desired, but it is not required. 

LOWER HALF ASSEMBLY INSTRUCTIONS:

For the brass cartridge itself, you may want to polish with Renaissance Wax to prevent tarnish, or expect to polish often as untreated brass.